CONCEALED MOUNTING | 3100-Series

Technical specs(pdf): 3100-Series

1 1/4" (32 mm) O.D.

  • Flange is 3" (76 mm) diameter, 1/2" (13 mm) deep, 11 gauge type 304 stainless steel with satin finish.
  • Tenon plate is 13 gauge with slotted srew holes.
  • Flange is secured to concealed tenon plate with 3 stainless steel allen head screws.

CONCEALED MOUNTING | 3200-Series

Technical specs(pdf): 3200-Series

1 1/2" (38 mm) O.D.

EXPOSED MOUNTING | 3400-Series

Technical specs(pdf): 3400-Series

1 1/4" (32 mm) O.D.
  • Flange is 3" (76 mm) diameter, 1/8" (3 mm) thick type 304 stainless steel with a satin finish.
  • Exposed mounting screw holes are drilled and countersunk.

SWING-UP GRAB BAR | 3413

Technical specs(pdf): 3413


SWING-UP GRAB BAR | 3451

Technical specs(pdf): 3451


SWING-AWAY GRAB BAR | 3454

Technical specs(pdf): 3454


EXPOSED MOUNTING | 3500-Series

Technical specs(pdf): 3500-Series

1 1/2" (38 mm) O.D.
  • Flange is 3" (76 mm) diameter, 1/8" (3 mm) thick type 304 stainless steel with a satin finish.
  • Exposed mounting screw holes are drilled and countersunk.

SNAP FLANGE | 3700-Series

Technical specs(pdf): 3700-Series

1 1/4" (32 mm) O.D.

  • Cover snaps over mounting flange dimples to conceal screws.
  • Concealed mounting flange is 3 1/8" (79 mm) O.D. diameter with two screw holes and three locking dimples adn is 1/8" (3 mm) thick, type 304 thick stainless steel.
  • cover is type 304 stainless steel with satin finish, 22 gauge, 3 3/16" (81 mm) diameter.

1-1/4" DIA (32 mm) SERIES GRAB BAR WITH WHITE POWDER COATED FINISH | 3700-W

Technical specs(pdf): 3700-W


SNAP FLANGE | 3800-Series

Technical specs(pdf): 3800-Series

1 1/2" (38 mm) O.D.

  • Cover snaps over mounting flange dimples to conceal screws.
  • Concealed mounting flange is 3 1/8" (79 mm) O.D. diameter with two screw holes and three locking dimples adn is 1/8" (3 mm) thick, type 304 thick stainless steel.
  • Cover is type 304 stainless steel with satin finish, 22 gauge, 3 3/16" (81 mm) diameter.

1-1/2" DIA (38 mm) SERIES GRAB BAR WITH WHITE POWDER COATED FINISH | 3800-W

Technical specs(pdf): 3800-W


ANCHOR FOR 3/4" - 1" (19-25) THICK PARTITION EXPOSED MOUNTED GRAB BARS | 3923

Technical specs(pdf): 3923


ANCHOR FOR BACK TO BACK EXPOSED MOUNTED GRAB BARS | 3925

Technical specs(pdf): 3925

Anchor for Back to Back Exposed Mounted Grab Bars (model 3400 and 3500) on 3/4" (19) thick Metal Partition, shall be 1/4-20 X 3/4" (19) long internally threaded sleeves with 1/4-20 X 3/8" (10) long Phillips or slotted pan head machine screws. Anchor kit shall contain three (3) sleeves and six (6) machine screws. Specify one (1) kit per flange.

BARIATRIC SWING-UP GRAB BAR

Technical specs(pdf):

ASI's bariatric grab bars are designed to support a load in excess of 1250 lbs (567 kg) when properly installed. For non-slip gripping surface, add suffix -P (peened top bar surface)

SWING-UP GRAB BAR WITH SUPPORT LEG | 3414-M-P

Technical specs(pdf): 3414-M-P