STAINLESS STEEL MIRROR WITH INTEGRAL SHELF | 20655

Technical specs(pdf): 20655

The gently radiused edges provide added strength and complement the curves of the ASI Roval™ Collection. Mirror frame and 6” wide curved edge shelf are fabricated of 18 gauge type 304 stainless steel with satin finish. Mirror frame has polished seamless mitered corners. 0.25” (6.4 mm) thick plate glass mirror. Warranted for 15 years against silver spoilage. Choice of sizes.

ROVAL™ STAINLESS STEEL MIRROR | 20650

Technical specs(pdf): 20650

The gently radiused edges uniquely complement the curves of the ASI Roval™ Collection. Frame fabricated of 18 gauge type 304 stainless steel with satin finish and polished seamless mitered corners. 1/4" (6.4 mm) thick plate glass mirror. Warranted for 15 years against silver spoilage. Choice of sizes.

ROVAL™ STAINLESS STEEL MIRROR | 20650-B

Technical specs(pdf): 20650-B

Same as 20650 but with tempered glass.

FIXED TILT MIRROR | 0535

Technical specs(pdf): 0535

Offers visibility for wheelchair patients. Frame fabricated of 20 gauge stainless steel with a satin finish. Mirror is tapered from 4" (102 mm) at top to 1" (25 mm) at bottom. See chart for standard sizes.

FIXED TILT MIRROR WITH SHELF | 0537

Technical specs(pdf): 0537

Same as 0535 but with shelf 6" (152 mm) deep from wall.

ADJUSTABLE TILT MIRROR | 0600T

Technical specs(pdf): 0600T

Designed to provide easy visibility for wheelchair patients or return to upright position. Angle frame fabricated of 18 gauge stainless steel with corners welded and ground smooth. Tilts a full 6" (152 mm) with bottom mounted on full width stainless steel piano hinge.

STAINLESS STEEL CHANNEL FRAME MIRROR WITH SHELF | 0625

Technical specs(pdf): 0625

Similar to 0620, but with 18 gauge stainless steel shelf with satin finish and all edges returned and hemmed for maximum rigidity and safety. Shelf is welded to face frame and is 5" (127 mm) wide.

FRAMELESS STAINLESS STEEL MIRROR | 8026

Technical specs(pdf): 8026

Fabricated of 20 gauge type 304 stainless steel polished to a #8 mirror finish with a 1/4" (6 mm) return. Provided with 1/4" (6 mm) thick concealed tempered masonite backing and 4 mounting holes. Installer shall provide mounting screws to suit individual field conditions. See chart for standard sizes.

ANGLE FRAME MIRROR | 0600

Technical specs(pdf): 0600

3/4" x 5/8" (19 x 16 mm) roll formed 18 gauge type 304 stainless steel angle has corners heliarc welded, ground and polished smooth to a uniform satin finish. Mirror is installed on concealed hanging bracket that locks onto top and bottom of frame by tamper-proof set screws. Back plate is one piece, attached to frame with theft resistant locking device. See chart for standard sizes.

STAINLESS STEEL ANGLE FRAME MIRROR WITH SHELF | 0605

Technical specs(pdf): 0605

Similar to 0600, but includes shelf of 18 gauge stainless steel with satin finish and all edges returned and hemmed for maximum rigidity and safety. Shelf is welded to face frame and is 5" (127 mm) wide.

CHANNEL FRAME MIRROR | 0620

Technical specs(pdf): 0620

1/2" x 1/2" x 1/2" (13 x 13 x 13 mm) 20 gauge type 304 satin finish stainless steel channel is a one piece roll formed member that encases mirror and backing revealing a tight mitered corner. Mirror is installed on two wall brackets and held secure by theft resistant screw.

FRAMELESS MIRROR | 8287

Technical specs(pdf): 8287

Frameless mirrors offer clean lines to complement every type of interior design and are easy to care for. One piece can be up to 28 sq. ft. (2.6 m2), as long as either H or W dimension is less than 84" (2134mm). Mirrors larger than 28 sq. ft. (2.6 m2) or with either linear H or W dimension larger than 84" (2134mm) shall be supplied as multiple pieces. Made of 1/4" polished plate glass.