SURFACE MOUNTED TWIN HIDE-A-ROLL TOILET TISSUE DISPENSER | 20030

Technical specs(pdf): 20030

Holds two rolls up to 5 1/4" (133 mm) diameter (double roll capacity 3600 sheets). Top roll automatically drops in place when bottom roll is used up. Type 304 satin finish stainless steel cabinet and mechanism. Theft-resistant spindles with integral plated steel endpins.

Overall Size
6 1/16" W x 12 1/8" H x 6 1/2" D (154 x 308 x 165 mm)

SEMI-RECESSED MOUNTED TWIN HIDE-A-ROLL TOILET TISSUE DISPENSER | 20031

Technical specs(pdf): 20031

Same as 20030 but with flange for semi-recessing.

SURFACE MOUNTED DUAL ROLL TOILET TISSUE DISPENSER | 9030

Technical specs(pdf): 9030

Holds two rolls up to 5 1/4" (135 mm) diameter (1800 sheets). Top roll automatically drops in place when bottom roll is used up. Type 304 stainless steel cabinet and mechanism. Theft resistant spindles.

Overall Size
6" x 12" x 6 1/2" (150 x 300 x 165 mm).

RECESSED DUAL ROLL TOILET TISSUE DISPENSER | 9031

Technical specs(pdf): 9031

Holds two rolls up to 5 1/4" (135 mm) diameter (1800 sheets). Top roll automatically drops in place when bottom roll is used up. Type 304 stainless steel cabinet and mechanism. Theft resistant spindles.

Overall Size
8" x 14" x 6 1/2" (150 x 300 x 165 mm) with flange for recessing.

SINGLE TOILET PAPER ROLL HOLDER | 7314

Technical specs(pdf): 7314

The toilet paper placed on this bail-type holder has unrestricted feed. Its design allows for easy replacement by maintenance or even guests. All exposed surfaces have a satin finish.
Paper bar is reversible to change handing.


Overall Size
5 3/16” (131 mm) x 3 3/8” (86 mm) x 2 9/16” (65 mm)

SINGLE TOILET PAPER ROLL HOLDER WITH HOOD | 7314-H

Technical specs(pdf): 7314-H

Similar to 7314 but with a satin-finish hood. Hood adds weight for easy tear and also protects paper roll from water droplets.

Overall Size
5 7/8” (149 mm) x 5” (127 mm) x 2 9/16” (65 mm)

SPARE TOILET PAPER HOLDER | 7316

Technical specs(pdf): 7316

Holds one roll of toilet paper. Extends 4”
(102 mm) from wall. All exposed surfaces have
a satin finish.
 

Overall Size
3 35/64” DIA (Ø90 mm) x 6 5/8” (167 mm)

RECESSED TOILET TISSUE HOLDER | 7402

Technical specs(pdf): 7402

Spring loaded chrome roller.
Available in Bright Stainless Steel (B) or Satin Stainless Steel (S).
7402-B
7402-S
 
For theft-resistant spindle, add R-009 after model number.
 
If drywall installation is required, add suffix "D" to model number. If wetwall installation is required, add "W" to model number (no clamp is required for wetwall).

Overall Size
6 1/4" x 6 1/4" (160 x 160 mm).

RECESSED TOILET PAPER HOLDER | 7402-H

Technical specs(pdf): 7402-H

Same as 7402 but with hood.
 
Available in Bright Stainless Steel (B) or Satin Stainless Steel (S).
7402-HB
7402-HS

For theft-resistant spindle, add R-009 after model number.

If drywall installation is required, add suffix "D" to model number. If wetwall installation is required, add "W" to model number (no clamp is required for wetwall).

RECESSED TOILET PAPER HOLDER | 7402-SM

Technical specs(pdf): 7402-SM

Same as 7402 but surface mounted.
 
Available in Bright Stainless Steel (B) or Satin Stainless Steel (S).
7402-BSM
7402-SSM

For theft-resistant spindle, add R-009 after model number.

If drywall installation is required, add suffix "D" to model number. If wetwall installation is required, add "W" to model number (no clamp is required for wetwall).

RECESSED STAINLESS STEEL DOUBLE TOILET TISSUE HOLDER | 74022

Technical specs(pdf): 74022

Available in Bright Stainless Steel (B) or Satin Stainless Steel (S).
74022-B
74022-S
 
For theft-resistant spindle, add R-009 after model number.
 
If drywall installation is required, add suffix "D" to model number. If wetwall installation is required, add "W" to model number (no clamp is required for wetwall).

Overall Size
12 1/2" x 6 1/4" (320 x 160 mm).

RECESSED STAINLESS STEEL DOUBLE TOILET TISSUE HOLDER W/HOOD | 74022-H

Technical specs(pdf): 74022-H

Same as 74022 but with hood.
 
Available in Bright Stainless Steel (B) or Satin Stainless Steel (S).
74022-HB
74022-HS
 
For theft-resistant spindle, add R-009 after model number.
 
If drywall installation is required, add suffix "D" to model number. If wetwall installation is required, add "W" to model number (no clamp is required for wetwall).

Wall Opening:
11 3/4" x 5 1/4" x 2" (300 x 135 x 50 mm).

STAINLESS STEEL DOUBLE TOILET TISSUE HOLDER W/HOOD | 74022-HSM

Technical specs(pdf): 74022-HSM

Same as 74022-H but surface mounted.
 
Available in Bright Stainless Steel (B) or Satin Stainless Steel (S).
74022-HBSM
74022-HSSM
 
For theft-resistant spindle, add R-009 after model number.
 
If drywall installation is required, add suffix "D" to model number. If wetwall installation is required, add "W" to model number (no clamp is required for wetwall).

Wall Opening:
11 3/4" x 5 1/4" x 2" (300 x 135 x 50 mm).

STAINLESS STEEL DOUBLE TOILET TISSUE HOLDER | 74022-SM

Technical specs(pdf): 74022-SM

Same as 74022 but surface mounted.
 
Available in Bright Stainless Steel (B) or Satin Stainless Steel (S).
74022-BSM
74022-SSM
 
For theft-resistant spindle, add R-009 after model number.
 
If drywall installation is required, add suffix "D" to model number. If wetwall installation is required, add "W" to model number (no clamp is required for wetwall).

Wall Opening:
11 3/4" x 5 1/4" x 2" (300 x 135 x 50 mm).

EXTRA ROLL RECESSED TOILET TISSUE HOLDER | 7403

Technical specs(pdf): 7403

Spring loaded chrome roller. Extra roll stored behind roll in use.
 
Available in Bright Stainless Steel (B) or Satin Stainless Steel (S).
7403-B
7403-S

For theft-resistant spindle, add R-009 after model number.

If drywall installation is required, add suffix "D" to model number. If wetwall installation is required, add "W" to model number (no clamp is required for wetwall).

Overall Size
6 1/4" x 6 1/4" (160 x 160 mm).

ZAMAC BATHROOM ACCESSORIES - TOILET PAPER HOLDER | 0705-Z

Technical specs(pdf): 0705-Z


ZAMAC BATHROOM ACCESSORIES - RECESSED TOILET TISSUE HOLDER | 0402-Z

Technical specs(pdf): 0402-Z


Wall Opening:
5 1/4" x 5 1/4" x 2" (135 x 135 x 50 mm)

SURFACE MOUNTED DUAL ROLL TOILET TISSUE DISPENSER | 0030

Technical specs(pdf): 0030

Holds two rolls up to 5 1/4" (135 mm) diameter (1800 sheets). Top roll automatically drops in place when bottom roll is used up. Type 304 stainless steel cabinet and mechanism. Theft resistant spindles.

Overall Size
6" x 12" x 6 1/2" (150 x 300 x 165 mm).

SEMI-RECESSED MOUNTED TWIN HIDE-A-ROLL TOILET PAPER DISPENSER | 0033

Technical specs(pdf): 0033

Similar to 0030 but semi-recessed for reduced partitions and wall projection.

 


Wall Opening:
6-1/4" x 12-1/4" x 3-3/8" min. (159 x 311 x 86 mm)

RECESSED DUAL ROLL TOILET TISSUE DISPENSER | 0031

Technical specs(pdf): 0031

Similar to 0030, but provided with flange for recess mounting.

Wall Opening:
6 1/4" x 12 1/4" x 3 3/8" (160 x 310 x 90 mm)

DUAL ACCESS PARTITION MOUNTED DUAL ROLL TOILET TISSUE DISPENSER STAINLESS STEEL | 0032

Technical specs(pdf): 0032

Same function as 0031, but serves two toilet compartments by mounting through partition. Dispenses 4 toilet tissue rolls. Adjustable to accommodate partitions from 1/2" to 2-1/2" thick (13 to 64 mm).
Partition Opening:
12-1/8" x 12-1/4" (308 x 311 mm).

PARTITION MOUNTED DUAL TWIN HIDE-A-ROLL TOILET PAPER DISPENSER | 0034

Technical specs(pdf): 0034

Similar to 0032 but for reduced partition projection.
Adjustable to accommodate partitions from 3/4" to 311/8" thick (19 to 79 mm)
 
Partition Opening:
12-7/8" x 12-1/4" (327 x 311 mm)

THEFT-RESISTANT SPINDLE | R-009

Technical specs(pdf): R-009

R-009 Theft-resistant spindle is available for any toilet tissue holder indicated with an asterisk, by adding R009 suffix after model number.

EXTRA ROLL TOILET TISSUE HOLDER | 7303

Technical specs(pdf): 7303

Extra roll of paper is placed over the horn type holder. Stainless steel set screw on bottom of flange locks unit to mounting plate.

SURFACE MOUNTED FOLDED TOILET TISSUE CABINET | 0262

Technical specs(pdf): 0262

22 gauge type 304 stainless steel with satin finish, provided with tumbler lock and view slot. Unit accommodates 1300 single or double fold toilet tissues.

Overall Size
4 3/4" x 8 1/4" x 3" (120 x 210 x 76 mm).

SURFACE MOUNTED TWIN 9" JUMBO ROLL TOILET TISSUE DISPENSER | 0040

Technical specs(pdf): 0040

Holds two 9" (230 mm) diameter rolls of 2 1/4" or 3" (57 or 76 mm) diameter core. When one roll is depleted, slide panel to expose other roll. Door cabinet and mounting plate fabricated of 18 gauge type 304 stainless steel with a satin finish. Two viewing slot and tumbler lock.

Overall Size
20 13/16" x 11 3/8" x 6 3/16" (530 x 290 x 160 mm)

SURFACE MOUNTED JUMBO ROLL TOILET TISSUE DISPENSER | 0042

Technical specs(pdf): 0042

Holds one roll up to 10" (254 mm) diameter of 1 5/8" or 2 1/4" (41 or 57 mm) diameter core. Outer cabinet is type 304 stainless steel with a satin finish. Unit has viewing slot and tumbler lock.

Overall Size
10 5/8" x 4 1/2" (270 x 115 mm).

SURFACE MOUNTED JUMBO ROLL TOILET PAPER DISPENSER | 0046

Technical specs(pdf): 0046

Holds one roll up to 13 1/2" (343 mm) diameter and 4 5/16" (110 mm) wide with 1 5/8" or 2 1/4" (41 or 57 mm) diameter core. Outer cabinet is 22 gauge type 304 stainless steel 18-8 with a satin finish and hung on pin . Unit has viewing slot and tumbler lock.

Overall Size
14" x 13 7/8" x 4 1/2" (356 x 352 x 114)

DOUBLE ROLL TOILET TISSUE DISPENSER | 0264-1

Technical specs(pdf): 0264-1

Heavy-duty cast aluminum, satin matte silver-gray finish. No waste rocking action spindles of cycolac ABS thermoplastic. Holds 2 rolls up to 6" (150 mm) diameter (2000 sheets).

Overall Size
13" x 1 3/4" x 4 3/4" (330 x 45 x 120 mm).

DOUBLE ROLL TOILET TISSUE DISPENSER | 0264-12

Technical specs(pdf): 0264-12

Similar to 0264-1, but with vandal resistant spindle locked into place by concealed set screw.

Overall Size
13" x 1 3/4" x 4 3/4" (330 x 45 x 120 mm).

DOUBLE ROLL TOILET TISSUE DISPENSER | 0264-1A

Technical specs(pdf): 0264-1A

Similar to 0264-1, without controlled delivery.

Overall Size
13" x 1 3/4" x 4 3/4" (330 x 45 x 120 mm).

DOUBLE ROLL TOILET TISSUE DISPENSER | 0264-1A2

Technical specs(pdf): 0264-1A2

Similar to 0264-12, without controlled delivery.

Overall Size
13" x 1 3/4" x 4 3/4" (330 x 45 x 120 mm).

VANDAL RESISTANT HOOD | 0267

Technical specs(pdf): 0267

14 gauge satin finish stainless steel for use only with 0264-1 (specified and purchased separately).

VANDAL RESISTANT HOOD | 0266

Technical specs(pdf): 0266

Similar to 0267, but for use only with 0263-1 (specified and purchased separately).

SINGLE ROLL TOILET TISSUE DISPENSER | 0263-1

Technical specs(pdf): 0263-1

Heavy-duty cast aluminum, satin matte silver-gray finish. No waste rocking action spindles of cycolac ABS thermoplastic. Holds a roll up to 6" (150 mm) diameter (2000 sheets).

Overall Size
6 9/16" x 1 3/4" x 4 3/4" (167 x 44 x 120 mm).

SINGLE ROLL TOILET TISSUE DISPENSER | 0263-1A

Technical specs(pdf): 0263-1A

Similar to 0263-1, without controlled delivery.

Overall Size
6 9/16" x 1 3/4" x 4 3/4" (167 x 44 x 120 mm).

SINGLE ROLL TOILET TISSUE DISPENSER | 0263-12

Technical specs(pdf): 0263-12

Similar to 0263-1, but with vandal resistant spindle locked into place by concealed set screw.

Overall Size
6 9/16" x 1 3/4" x 4 3/4" (167 x 44 x 120 mm).

STAINLESS STEEL SHELF AND DOUBLE TOILET TISSUE HOLDER | 0697-GAL

Technical specs(pdf): 0697-GAL

Shelf, 18 gauge type 304 stainless steel satin finish with front edge hemmed. Holds two 1800 sheet toilet tissue rolls.

Overall Size
18" x 5" (460 x 130 mm).

DOUBLE SURFACE MOUNTED TOILET TISSUE HOLDER CHROME-PLATED STEEL | 0715

Technical specs(pdf): 0715

Provided with vandal resistant locking device and mechanism to provide controlled delivery. High polish finish. Dispenses two standard or 1800 sheet toilet tissue rolls.

Overall Size
12 3/8" x 2 3/4" x 4 1/4" (315 x 70 x 110 mm).

SINGLE SURFACE MOUNTED TOILET TISSUE HOLDER CHROME-PLATED STEEL | 0710

Technical specs(pdf): 0710

Similar to 0715, but dispenses one standard or 1800 sheet toilet tissue roll.

Overall Size
6" x 2 3/4" x 4 1/4" (150 x 70 x 110 mm).

SINGLE-ROLL SURFACE MOUNTED STAINLESS STEEL TOILET PAPER HOLDER | 7305

Technical specs(pdf): 7305

Type 304 bright finish stainless steel with chrome-plated roller. Heavy gauge concealed bracket mounts on wall secured with stainless steel set screw. Holds 1800 sheet standard core roll. 
 
Available in Bright (B) and Satin (S) finish.
7305-B
7305-S
 
For theft-resistant spindle, add R-009 after model number.

Overall Size
7 3/4" x 2" x 3 7/8" (200 x 50 x 100 mm)

DOUBLE-ROLL SURFACE MOUNTED STAINLESS STEEL TOILET PAPER HOLDER | 7305-2

Technical specs(pdf): 7305-2

Similar to 7305, but for two 1800 sheet standard core rolls.
 
Available in Bright (B) and Satin (S) finish.
7305-2B
7305-2S
 
For theft-resistant spindle, add R-009 after model number.

Overall Size
13 1/2" x 2" x 3 7/8" (340x 50 x 100 mm)

LOW PROFILE SURFACE MOUNTED JUMBO-ROLL TOILET TISSUE DISPENSER | 0039

Technical specs(pdf): 0039

This low profile surface mounted toilet tissue dispenser holds two (2) jumbo-size 9" diameter (Ø229) rolls of 3" diameter (Ø76) or 2-1/4" diameter (Ø57) core tissue. When one roll is finished, the other roll can be selected by shifting over panel lever at bottom of unit. 

Overall Size
20 1/2" x 11 3/16" x 4 11/16" (521 x 284 x 119 mm)