WingItTM Grab Bar Fastener | 251-4

Technical specs(pdf): 251-4

for 2 1/2" and 3 1/2" (65 and 90mm) or deeper hollow walls with finished wall surfaces 1/4" to 1 1/2" (6 to 38mm) thick. Corrosion resistant stainless steel. One required for each flange. Fastener will support 300 lbs (136 kg) load. WingItTM is a trademark of WingIt innovations, LLC.

Optional Mounting Kit | 2521-30

Technical specs(pdf): 2521-30

Mounting Kit - 3 Stainless Steel 3 1/2" Round-Head Machine Screws and Toggle Nuts - One Required for Each Flange

Optional Mounting Kit | 2522-30

Technical specs(pdf): 2522-30

Mounting Kit - 3 Stainless Steel Round-Head Machine Screws and Expansion Shields - One Required for Each Flange

Optional Anchor Device | 2583

Technical specs(pdf): 2583

Anchor for Installation of Individual Grab Bar Through 3/4" to 1" Thick Toilet Compartment Panel - One Required for Each Flange

Optional Anchor Device | 2586

Technical specs(pdf): 2586

Anchor for Installation of Individual Grab Bar Through 1/2" Thick Toilet Compartment Panel - One Required for Each Flange

Swing Up Grab Bar | B-4998

Technical specs(pdf): B-4998

29" (74cm), 1-1/4" (32mm) dia., satin-finish stainless steel

Wall to Floor Grab Bar with Socket End | 819388

Technical specs(pdf): 819388

Grab bar shall be type-304 stainless steel with satin-finish. Grab bar shall have 18-gauge (1.2mm) wall thickness and 1-1/2" (38mm) outside diameter with concelead mounting flange. Grab bar shall comply with accessible toilet compartment guidelines (including ADAAG in the U. S. A.) for structural strength.

Swing Up Grab Bar | B-4998.99

Technical specs(pdf): B-4998.99

29" (74cm), 1-1/4" dia. (32mm), satin finish stainless steel peened

Straight Grab Bar | B-5806 x 18

Technical specs(pdf): B-5806 x 18

18" (455mm) long, 1-1/4" (32mm) dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Straight Grab Bar | B-5806 x 24

Technical specs(pdf): B-5806 x 24

24" (610mm) long, 1-1/4" (32mm) dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Straight Grab Bar | B-5806 x 30

Technical specs(pdf): B-5806 x 30

30" (760mm) long, 1-1/4" (32mm) dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Straight Grab Bar | B-5806 x 42

Technical specs(pdf): B-5806 x 42

42" (1065mm) long, 1-1/4" (32mm) dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Straight Grab Bar | B-5806 x 36

Technical specs(pdf): B-5806 x 36

36" (915mm) long, 1-1/4" (32mm) dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Optional Mounting Kit | 252-30

Technical specs(pdf): 252-30

Mounting Kit - 3 Round-Head Sheet-Metal Screws - One Required for Each Flange

Straight Grab Bar | B-5806 x 48

Technical specs(pdf): B-5806 x 48

48" (1220mm) long, 1-1/4" (32mm) dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Straight Grab Bar Peened | B-5806.99 x 18

Technical specs(pdf): B-5806.99 x 18

18" (455mm) long, 1-1/4" (32mm) dia. tubing , peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Straight Grab Bar Peened | B-5806.99 x 24

Technical specs(pdf): B-5806.99 x 24

24" (610mm) long, 1-1/4" (32mm) dia. tubing, peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Straight Grab Bar Peened | B-5806.99 x 30

Technical specs(pdf): B-5806.99 x 30

30" (760mm) long, 1-1/4" (32mm) dia. tubing, peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Straight Grab Bar Peened | B-5806.99 x 36

Technical specs(pdf): B-5806.99 x 36

36" (915mm) long, 1-1/4" (32mm) dia. tubing, peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Straight Grab Bar Peened | B-5806.99 x 42

Technical specs(pdf): B-5806.99 x 42

42" (1065mm) long, 1-1/4" (32mm) dia. tubing, peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Two-Wall Tub/Shower Toilet Compartment Grab Bar | B-5837

Technical specs(pdf): B-5837

36" W x 54" D (91 x 137cm), 1-1/4" (32mm) dia. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Two-Wall Tub/Shower Toilet Compartment Grab Bar | B-5837.99

Technical specs(pdf): B-5837.99

36" W x 54" D (91 x 137cm), 1-1/4" (32mm) dia., peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Two-Wall Tub/Shower Toilet Compartment Grab Bar | B-58616

Technical specs(pdf): B-58616

24" W x 36" D (61 x 91cm), 1-1/4" (32mm) dia. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Two-Wall Tub/Shower Toilet Compartment Grab Bar Peened | B-58616.99

Technical specs(pdf): B-58616.99

24" W x 36" D (61 x 91cm), 1-1/4" dia. (32mm), peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Two-Wall Toilet Compartment Grab Bar | B-5897

Technical specs(pdf): B-5897

42" W x 54" D (107 x 137cm), 1-1/4" (32mm) dia. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Two-Wall Toilet Compartment Grab Bar Peened | B-5897.99

Technical specs(pdf): B-5897.99

42" W x 54" D (107 x 137cm), 1-1/4" (32mm) dia., peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Straight Grab Bar | B-6806 x 12

Technical specs(pdf): B-6806 x 12

12" (305mm) long, 1-1/2" (38mm) dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Straight Grab Bar | B-6806 x 18

Technical specs(pdf): B-6806 x 18

18" (455mm) long, 1-1/2" (38mm)dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Straight Grab Bar | B-6806 x 24

Technical specs(pdf): B-6806 x 24

24" (610mm) long, 1-1/2" (38mm) dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Straight Grab Bar | B-6806 x 30

Technical specs(pdf): B-6806 x 30

30" (760mm) long, 1-1/2" (38mm) dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Straight Grab Bar | B-6806 x 36

Technical specs(pdf): B-6806 x 36

36" (915mm) long, 1-1/2" (38mm) dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Straight Grab Bar | B-6806 x 42

Technical specs(pdf): B-6806 x 42

42" (1065mm) long, 1-1/2" (38mm) dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Straight Grab Bar Peened | B-6806.99 x 12

Technical specs(pdf): B-6806.99 x 12

12" (455mm) long, 1-1/2" (38mm) dia. tubing, peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Straight Grab Bar | B-6806 x 48

Technical specs(pdf): B-6806 x 48

48" (1220) long, 1-1/2" dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Straight Grab Bar Peened | B-6806.99 x 18

Technical specs(pdf): B-6806.99 x 18

18" (455mm) long, 1-1/2" (38mm) dia. tubing, peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Straight Grab Bar Peened | B-6806.99 x 24

Technical specs(pdf): B-6806.99 x 24

24" (610mm) long, 1-1/2" (38mm) dia. tubing, peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Straight Grab Bar Peened | B-6806.99 x 30

Technical specs(pdf): B-6806.99 x 30

30" (760mm) long, 1-1/2" (38mm) dia. tubing, peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Straight Grab Bar Peened | B-6806.99 x 36

Technical specs(pdf): B-6806.99 x 36

36" (915mm) long, 1-1/2" (38mm) dia. tubing, peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Straight Grab Bar Peened | B-6806.99 x 42

Technical specs(pdf): B-6806.99 x 42

42" (1065mm) long, 1-1/2" (38mm) dia. tubing, peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Two-Wall Tub/Shower Toilet Compartment Grab Bar Peened | B-68137.99

Technical specs(pdf): B-68137.99

36" W x 54" D (91 x 137cm), 1-1/2" (38mm) dia., peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Two-Wall Shower Grab Bar | B-6861

Technical specs(pdf): B-6861

15-7/8" W x 30-7/8" D (40 x 78cm), 1-1/2" (38mm) dia. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Two-Wall Shower Grab Bar Peened | B-6861.99

Technical specs(pdf): B-6861.99

15-7/8" W x 30-7/8" D (40 x 78cm), 1-1/2" (38mm) dia., peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Two-Wall Tub/Shower Toilet Compartment Grab Bar | B-68137

Technical specs(pdf): B-68137

36" W x 54" D (91 x 137cm), 1-1/2" (38mm) dia. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Two-Wall Shower/Tub Compartment Grab Bar | B-68616

Technical specs(pdf): B-68616

24" W x 36" D (61 x 91cm), 1-1/2" (38mm) dia. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Two-Wall Shower/Tub Compartment Grab Bar Peened | B-68616.99

Technical specs(pdf): B-68616.99

24" W x 36" D (61 x 91cm), 1-1/2" (38mm) dia., peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws

Two-Wall Toilet Compartment Grab Bar | B-6897

Technical specs(pdf): B-6897

42" W x 54" D (107 x 137cm), 1-1/2" (38mm) dia. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

Two-Wall Toilet Compartment Grab Bar Peened | B-6897.99

Technical specs(pdf): B-6897.99

42" W x 54" D (107 x 137cm), 1-1/2" (38mm) dia., peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.